A review of phosphorescent and fluorescent phosphors for fingerprint detection

Currently, the efficient detection of fingerprints is essential for the crime investigations. Revealing fingerprints is commonly achieved with fluorescent organic compounds but they are not efficient for fingerprint detection on porous or reflective surfaces. In order to solve the problem of collecting fingerprints on porous/reflective surfaces, inorganic phosphors have been employed, since they have characteristics of variable color emission, afterglow, high chemical stability and nano-size, which allow the fingerprint detection on any porous or non-porous surfaces. Due to these last properties, this review presents a summary about the use of phosphorescent and fluorescent phosphors for the detection of latent fingerprints. First, we discussed the main physical and chemical characteristics of the fingerprints which permit their detection and collection from any surface. After this, we presented the main morphological, structural and luminescent properties of the phosphorescent and fluorescent phosphors that allow their use for fingerprint detection. Later, we demonstrated with pictures of fingerprints (with and without light emission from the phosphors deposited on them) that both, phosphorescent and fluorescent phosphors can be used to visualize fingerprints with high resolution and high contrast without interference of the background surface, which is ideal for its collection and registration in the Automated Fingerprint Identification System (AFIS). We believe that this review could be useful to understand how to select an appropriate phosphorescent or fluorescent material for fingerprint detection depending on the type of surface (porous or non-porous, reflective or not reflective) where the fingerprint is deposited.     

Facile and efficient synthesis of magnetic fluorescent nanocomposites based on carbon nanotubes

Multifunctional nanomaterials composed of magnetic and fluorescent nanoparticles have been one of the most extensive pursuits because of the potential application in bio-research. In this paper, we demonstrated an efficient method by coupling CdSe/CdS/ZnS quantum dots (QDs) with Fe₃O₄ magnetic nanoparticles(MNPs) while functionalized multiwall carbon nanotubes (f-MWCNTs) were used as matrix to synthesize a kind of magnetic fluorescent nanocomposite. Compared with other matrix materials, carbon nanotubes have the advantages of high surface areas and good biocompatibility. The incorporation of f-MWCNTs supplies plenty of nucleation sites for the preferential growth of Fe₃O₄ nanoparticles, avoiding the agglomeration phenomenon of Fe₃O₄ MNPs in traditional co-precipitation method. Moreover, the un-reacted functional groups of f-MCNTs can further adsorb biological species and drugs, averting the decline of fluorescent intensity caused by the modification of biological species and drugs. The synthetic product maintains the unique properties of rapid magnetic response and efficient fluorescence, which shows a broad application prospect in fluorescent labeling, biological imaging, cell tracking and drug delivery.     

A Fluorometric Enzymatic Assay for Quantification of Steryl Glucosides in Biodiesel

Steryl glucosides (SG) are common contaminants in biodiesel that form precipitates, which form and cause problems due to fouling during transport and storage. Therefore, their quantification is necessary to assess the quality of this fuel. The methods currently available for SG analysis require expensive instrumentation, need a previous concentration step by solid‐phase extraction (SPE) or are of limited use for the quantitative assessment. We developed an enzymatic method for SG quantification in biodiesel samples based on the hydrolysis of the glucoside catalyzed by a broadly specific beta glucosidase and the subsequent determination of the glucose released by the reaction. The method is non‐expensive, sensitive and was adapted to 96‐well format fluorescence plate reader, making it useful for the parallel assay of multiple samples. The enzymatic assay presented here represent a valuable tool for both quality control and the development of improved biodiesel production and purification procedures.     

Potential of in-field and low temperature drying for reducing chlorophyll contents in canola (Brassica napus L)

The presence of green seeds in canola arises primarily from the common practice of swathing the crop prematurely in order to hasten the harvesting process and reduce the shattering losses. The purpose of this study was to determine the effects of plant maturity, swathing and duration of swathing on moisture and chlorophyll contents of canola seeds (Brassica napus L cv Westar), and to determine the effect of canola conditioning with air at 25·C and 90% RH on chlorophyll content. A standing crop of canola with 50% to 10% (w/w) seed moisture content was sampled at regular intervals in two consecutive harvest years (1989 and 1990). Canola was also swathed at three different stages of maturity, and seeds were checked for chlorophyll at 2-3 day intervals and compared with chlorophyll contents of seed from standing crop. Samples were conditioned in a thin layer with air at 25·C and 90% RH for 24 h, and chlorophyll was determined before and after conditioning. The chlorophyll of seeds decreased exponentially with a decrease in moisture content. Conditioning canola seeds decreased chlorophyll content by an average of 16% (SD = ± 12%).     

Fluorescence and IR characterization of epoxy cured with aliphatic amines

Cure reactions of the stoichiometric mixtures of diglycidyl ether of bisphenol A (DGEBA) and two very low molecular weight aliphatic polyether diamines (PED) were studied by using fluorescence and mid- and near-IR spectroscopic techniques. As the cure proceeded, the primary amine groups in PED are converted to the secondary and the tertiary amines. Near-IR spectral analysis was used to calculate the concentration of the three amine groups as a function of cure time. The decrease in the fluorescence intensity of DGEBA at about 307 nm was observed due to more effective quenching of the tertiary amine groups in PED, in comparison to the primary and the secondary amine groups. A large decrease in fluorescence intensity at 75 and 95 °C cure was observed. The amount of all the amine species was estimated from NIR spectra to shed light on the cure kinetics of PPO (polypropylene oxide) in comparison with PEO (polyethylene oxide) epoxy, as well as to explain their fluorescence behavior.The fluorescence intensity changes were correlated to the extent of epoxy reaction obtained by mid- and near-IR spectroscopy.     

Synthesis of polyanilines with pendant fluorescent units

Functionalized polyanilines containing biphenyl, terphenyl, carbazole, anthracene, and 4-n-hexylphenyl moieties were synthesized though the reaction of polyaniline in emeraldine base form with sodium salt of corresponding vinylketoaromatics with quantitative yields. Polymers were characterized with Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and thermogravimetry. The emission characteristics of these polymers in N-methyl-2-pyrrolidone solution were examined. The functionalized polyanilines exhibited an intense green emission.     

Interfacial hybridization kinetics of oligonucleotides immobilized onto fused silica surfaces

Fused silica optical fibers have been used in an intrinsic mode optical configuration as biosensors for fluorescence based detection of hybridization of nucleic acids. In this work, the kinetics of hybridization of single-stranded oligonucleotides that were covalently immobilized were studied. The probe DNA was dT₂₀, and the target was Fluorescein-labeled non-complementary (dT₂₀) or complementary (dA₂₀) oligonucleotide. Chronofluorimetric monitoring of the adsorption and hybridization processes was used to investigate oligonucleotide films of different density, in different salt concentrations, at temperatures of 25 and 40 °C, with the concentration of the target DNA being 0.005–0.1 μM. Mathematical models based on first- and second-order Langmuir adsorption have been examined to describe both the adsorption and the hybridization processes. Experimental data were processed using the models, and the hybridization kinetics were calculated. Hybridization kinetics on these optical fiber DNA sensors was found to be up to three orders faster than results presented for a number of other experiments using different immobilization chemistries.     

Dynamics of photosynthetic pigments in an Andean lake in Colombia

Guatavita Lake is a small, sheltered tropical high mountain lake located in the Colombian Andes, with a closed watershed and a maximum depth of 25 m. It is the freshwater source for human consumption in nearby small towns, as well as being a site of cultural value for the country, as it was a sacred place to indigenous peoples until about five centuries ago. As the structure and function of this aquatic ecosystem is poorly understood, this study provides initial knowledge on its phytoplankton biomass dynamics, which should be useful in designing efficient management plans with environmental baseline information for similar lakes elsewhere. Physical and chemical data, and photosynthetic pigment concentrations, were measured for the period November 1999–November 2000 at the central vertical axis of Guatavita Lake. The vertical profile of the chlorophyll‐a concentration was closely related to the dissolved inorganic nitrogen concentrations and the thermal stratification characteristics. The maximum chlorophyll‐a concentration in the metalimnion was recorded for the thermal stratification period (November 1999–June 2000). Deepening of the maximum chlorophyll‐a concentration began in February, continuing to June, when it reached its lowest value at the 15 m depth. The phytoplankton biomass values showed an increment within the entire water column at the beginning of the mixing period (July). The relation between the metalimnetic peak of chlorophyll‐a and the dissolved inorganic nitrogen concentration suggests the growth of the phytoplankton community is limited mainly by the availability of nitrogen.     

Visible Light Excitation Characteristics of Novel Infrared Up-conversion Materials

The Fluorescence excitation spectrum, emission spectrum and infrared up-conversion luminescence excitation spectrum are measured. The results of spectrum measurement show that the electron trapping materials CaS: Eu, Sm are of visible light excitation. The mechanism of visible light excitation is analyzed.     

溶胶—凝胶法制备基于荧光猝灭原理的光纤氧传感器在线监测水中溶解氧

利用氧分子对金属钌化合物的荧光具有猝灭作用的特性,构造出基于荧光猝灭原理的光纤氧传感器。就用于水中溶解氧在线监测的光纤光谱仪的搭建、传感器探头的设制及传感膜的制作过程进行探索,并对传感器的响应性能进行考察。结果表明以联吡啶钌等作为荧光指示剂以溶胶-凝胶法制备的传感膜对溶解氧的响应具有良好的可逆性,稳定性,较快的响应时间和较长的使用寿命。与标准法相对照,用本仪器系统测定了不同盐度的人工海水中的溶解氧浓度,两种方法在不同浓度水平下的溶解氧测定值均无显著性差异。本法的日内和日间RSD在1.7％～5.0％之间。